We have met all the expectations of clients by manufacturing and exporting a foremost collection of Forced Draft Cooler. These coolers are made and designed at our state of the art machining facility by using quality material and modern technology. Best known for their longer service life, efficient cooling and easy installation, our Forced Draft Cooler is used in various industries for cooling the high temperature equipments. We adhere to the parameters of the national and international quality standards to provide the clients with utmost satisfaction in terms of quality.
Forced Draft Cooler is majorly used for reducing the temperature at the places where equipment having high temperature cannot be used . An air-to-air heat exchanger is used . With the use of banks of tubes placed vertically and horizontally, hot gas with average velocity of 20m/s is passed through inside or outside of the tubes. If cool air is passed, then it should be passed with a velocity of 6-7 m/s. Moreover, the Forced Drafter Cooler supplied by us is primarily preferred as it consumes less power.
Type of FD Cooler :
* FD Cooler of Vertical Circular Tube type :- In this type of cooler , tubes are fixed on top and bottom tube sheets. Hopper is incorporated for dust collection . It may not be necessary to operate all the fans at a time. One or number of fans can be put on or off depending on the outlet temperature of the cooler thus saves power.
We are the manufacturer of FD Cooler temperature range between 950oC - 180oC , 650oC. - 130oC. , 350oC. - 120oC. and any other specify range considering application and system design.